Storm Trim
Storm Trim hurricane panel anchor system
Storm Trim installs on the jambs or the head and sill of windows and doors, spanning up to 16 feet. It goes in during construction so siding or trim covers its nail fin.

Contractor-friendly
Installs during construction with the siding and trim. No extra trip to pass code once panels are stored on site.
Code-compliant
Florida approval 22062.2. Corrosion-resistant permanent anchors.
Clean looks
A removable Storm Cover conceals the anchor track. No hardware visible from the street.
Deployment
Reusable fastening points
Each panel has pre-routed spacing that aligns with the anchor track. Use the screws provided with Storm Trim regardless of panel type; they are engineered so panels can be removed and reinstalled many times without degrading the anchors.
- Remove the Storm Cover
- Align the pre-routed panel
- Fasten with the supplied deployment screws
- After the storm, remove panels and reinstall the cover


Supplied deployment screw
Use these regardless of panel type.

Without connect system
Fastened directly through the panel.

With connect system
Snap-in connectors for faster deployment.
Patented
US Patent 8,863,452
Trim for mounting exterior coverings for windows, plus a family of Storm Trim lineal designs.

Questions
Storm Trim questions
Where does Storm Trim install?
On the jambs, or the head and sill, of windows and doors. It spans up to 16 feet.
When is Storm Trim installed?
During construction, so siding or trim covers its nail fin and the anchors are hidden under the removable Storm Cover.
Is Storm Trim approved?
Yes. Storm Trim carries Florida approval 22062.2 and is covered by US Patent 8,863,452.
Can panels be reused?
Yes. The supplied deployment screws create reusable fastening points, so panels go up and come down many times.
Request a quote
Ready to transform your next project?
Send us your window and door schedule. We’ll come back with pricing, lead times and the right products for your build.
