Storm protection
Hurricane panel anchors and storm protection
Quick to install and code-compliant. Storm Jamb and Storm Trim allow fast panel installation with concealed attachments, and Storm Surround secures swing doors.


Storm Trim
Permanent anchors in finished exterior trim, spanning up to 16 feet, hidden under a removable Storm Cover.
View
Storm Jamb
Permanent anchors integrated into the window frame. Protection is in place the moment the window is.
View
Storm Surround
Impact-rated protection for swing doors with a clean, screw-free design.
ViewCompare
Which system fits the opening?
| System | Where it goes | Florida approval | Patent |
|---|---|---|---|
| Storm Trim | Jambs, or head and sill, of windows and doors; spans up to 16 feet | FL 22062.2 | US 8,863,452 |
| Storm Jamb | Built into the window frame | FL 32519.1 | US 10,604,989 |
| Storm Surround | Swing doors | — | US 10,641,035 |
| Storm Cover | Removable cap that hides the anchor track | FL 30032.1 | — |
Tested, code-compliant
Florida Building Code approvals
Storm Trim, Storm Jamb and Storm Cover carry Florida product approvals, and the system is covered by US Patent 8,863,452 and other patents and designs.
- Storm Trim: FL 22062.2
- Storm Jamb: FL 32519.1
- Storm Cover: FL 30032.1

Deployment
How fabric panels deploy
1. Remove the cover
When a storm warning is issued, remove the Storm Cover to expose the permanent anchor track.
2. Align the panel
Pre-routed spacing on each panel lines up with the screw starter locations built into the system.
3. Fasten with supplied screws
Always use the supplied screws, with or without a snap-in connect system. They create reusable fastening points.

Supplied deployment screw
Engineered for repeated install and removal.

Without connect system
Panel fastened directly through the pre-routed holes.

With connect system
Snap-in connectors for faster deployment.
Questions
Storm protection questions
What is the difference between Storm Trim and Storm Jamb?
Storm Trim puts permanent anchors in finished exterior trim around windows and doors. Storm Jamb builds the anchors into the window frame itself. Both use the same fabric panel deployment.
Are the systems code-approved?
Yes. Storm Trim (FL 22062.2), Storm Jamb (FL 32519.1) and Storm Cover (FL 30032.1) carry Florida product approvals.
How are panels deployed?
Remove the Storm Cover, align the pre-routed panel with the anchor track, and fasten with the supplied screws. After the storm, remove the panels and replace the cover.
Why use the supplied screws?
They are engineered so panels can be removed and reinstalled many times without degrading the anchors. Use them regardless of panel type.
Can fabric panels replace impact glass?
In some applications, fabric storm protection can meet DP requirements as an alternative to impact glass, often at a lower cost.
Request a quote
Ready to transform your next project?
Send us your window and door schedule. We’ll come back with pricing, lead times and the right products for your build.
